Advanced Micro Devices mill |
 |
| |
| Principle: |
|
OBJECTS GO INTO CRUSHING ROOM AND IMPACTED BY HAMMER TO CREATE GREAT COLLISION，FRICTION，
SHEARING TO REALIZE FINE POWDER.CRUSHED OBJECTS GO UP INTO GRADING ROOM WITH AIRFLOW,THE ONE WHICH
COMPLY WITH REQUIRED SIZE WILL GO THROUGH IMPELLER GRADER TO ENTER INTO COLLECTION SYSTEM;THE ONE
WHICH DON’T COMPLY WITH REQUIRED SIZE WILL RETURN BACK TO CRUSHING ROOM TO CRUSH CONTINUOUSLY.THE
ENTIRE PRODUCTION PROCEDURE IS IN A CLOSED ROOM AND RUN CONTINUOUSLY,THERE IS NO DUST POLLUTION. |
|
Features: |
|
1. INTEGRATE CRUSHING WITH AIRFLOW GRADING AND HAVE COMPACT REASONABLE STRUCTURE.THIS MACHINE CAN PRODUCE
REQUIRED SIZE OF PRODUCTS DIRECTLY.
2. HIGH PRODUCTION CAPACITY
INCOMING SIZE OF GRAIN IS ABOUT 5MM,THE SIZE OF FINISHED PRODUCTS d97 CAN BE ADJUSTED ARBITRARILY WITHIN
THE RANGE OF 7-150μm.
3. GENERALLY APPLIED TO OBJECTS BELOW GRADE 4 MORSE HARDNESS, IF ADOPTED SPECIAL WEAR-RESISTING MATERIAL,THE
MACHINE CAN APPLY TO GRADE 7 MORSE HARDNESS OBJECTS.
|
| APPLICABLE SCOPE: |
|
KAOLIN,CALCITE,LIMESTONE,CARBONATE,TALCUM,GYPSUM, GRAPHITE,QUARTZ,MAGNESIUM OXIDE，CORUNDUM，Al(OH)3 AND INSECTICIDE，ETC.
|
| TYPE AND SPECIFICATION: |
 |
JFF400 |
JFF500 |
JFF1000 |
|
Feeding particle size (mm) |
≤5 |
≤5 |
≤5 |
|
Product particle size (μm) |
7-150 |
7-150 |
7-150 |
|
Output (kg/h) |
40-200 |
200-1000 |
400-2000 |
|
Output (kw) |
28 |
80 |
160 |
|
External dimensions (m length and breadth high) |
6×2×3.8 |
8×2×3.8 |
10×2×3.8 | |
| JFF TYPE AND SPECIFICATION | 
| 1.Air compressor |
6.Compulsion hierarchy system |
10.Cyclone collector |
| 2.Gas tank |
7.Feed head |
11.Pulse bag type dust remover |
|
3-4.Highly effective filter |
8.Smashing system |
12.High-pressured drawing fan |
| 5.Freezing drying agent |
9.Cooling system |
13.Electric control system |
| |
|
